A tri clover clamp (also called a TC clamp or tri clamp) is the most widely used quick-release connection in hygienic stainless steel piping. It joins two tri clover ferrules with a gasket in between, creating a leak-tight seal that can be opened by hand for cleaning and inspection. Dairy plants, breweries, food processing units and pharmaceutical facilities rely on TC connections because they are fast to assemble and easy to keep clean.

This guide explains the tri clover clamp size chart, how clamp sizes relate to tube sizes, the main clamp types, gasket materials and how to select the right clamp for your system.

What Is a Tri Clover Clamp?

A tri clover clamp is a hinged stainless steel band that wraps around two flanged ferrule ends. When the wing nut is tightened, the tapered inside of the clamp pulls the ferrule faces together and compresses the gasket. The result is a smooth, crevice-free joint suitable for clean-in-place (CIP) systems.

A complete TC connection has three parts:

  • Two ferrules welded to the tube ends.
  • One gasket placed between the ferrule faces.
  • One clamp that holds the joint together.

Cera Pure Steel supplies SS tri clover clamps, TC blank ferrules and silicone TC gaskets for complete hygienic connections.

Tri Clover Clamp Size Chart

The clamp size is defined by the ferrule flange OD, not by the tube size. Several small tube sizes share one ferrule flange, so one clamp can fit more than one tube size. The table below shows commonly used reference values for standard (3-A / ASME BPE style) tri clamp ferrules.

Tube OD (inch) Tube OD (mm) Ferrule Flange OD (mm) Clamp Size
1/2″ 12.7 25.0 1/2″–3/4″ clamp
3/4″ 19.05 25.0 1/2″–3/4″ clamp
1″ 25.4 50.5 1″–1.5″ clamp
1.5″ 38.1 50.5 1″–1.5″ clamp
2″ 50.8 64.0 2″ clamp
2.5″ 63.5 77.5 2.5″ clamp
3″ 76.2 91.0 3″ clamp
4″ 101.6 119.0 4″ clamp
6″ 152.4 167.0 6″ clamp

Values are typical reference dimensions. DIN 32676 and ISO 2852 ferrules use metric tube sizes and can differ slightly, so always confirm the standard and supplier drawing before ordering.

Types of Tri Clover Clamps

1. Single Pin (Single Hinge) Clamp

The most common type, used for small and medium sizes up to about 4″. It has one hinge and a wing nut, making it quick to open and close.

2. Double Pin (Double Hinge) Clamp

Used for larger diameters. The extra hinge makes the clamp easier to fit around big ferrules and gives more even pressure on the gasket.

3. Heavy Duty Clamp

Built with a thicker band and bolt instead of a wing nut. Used where higher pressure or vibration is expected.

4. High Pressure Clamp

A solid two-piece bolted design for higher pressure ratings than standard clamps. Pressure rating depends on size, temperature, gasket and manufacturer data.

5. Three Piece Clamp

Has two hinges and three segments, which spreads clamping force more evenly on medium and large ferrules.

TC Ferrule Types

  • Short weld ferrule: compact ferrule for welding directly to the tube.
  • Long weld ferrule: longer body for easier orbital or manual welding.
  • Blank (end cap) ferrule: closes a TC end. See our TC blank ferrule.
  • Hose ferrule: connects flexible hose to TC piping. See TC hose ferrule.
  • Male adaptor: converts TC to threaded connection. See SS TC male adaptor.

Tri Clover Gasket Materials

Material Key Features Typical Use
Silicone Flexible, food grade, wide temperature range Dairy, food, pharma, general hygienic lines
EPDM Good with hot water, steam and CIP chemicals Steam and hot water lines
PTFE Highly chemical resistant, non-stick Aggressive chemicals, pharma
Viton (FKM) Resistant to oils, fuels and many solvents Oily or solvent-bearing products
Buna-N (Nitrile) Good oil and fat resistance Fatty foods, oils

Choose the gasket based on product, temperature, cleaning chemicals and any regulatory requirements (such as FDA or USP Class VI).

Clamp Materials: SS 304 vs SS 316

Tri clover clamps are usually made from SS 304, while ferrules in contact with the product are often SS 316L. Clamps do not touch the product, so SS 304 is enough for most applications. For marine or chloride-rich environments, SS 316 clamps offer better corrosion resistance. Read our detailed SS 304 vs SS 316 comparison.

Applications of Tri Clover Clamps

  • Dairy processing and milk transfer lines
  • Breweries, wineries and beverage plants
  • Pharmaceutical and biotech process lines
  • Food processing and sauce plants
  • Cosmetics and personal care manufacturing
  • CIP and SIP systems

How to Select the Right TC Clamp

  1. Confirm the tube OD and the ferrule standard (3-A, ASME BPE, DIN 32676 or ISO 2852).
  2. Match the clamp to the ferrule flange OD, not just the tube size.
  3. Choose clamp type based on pressure and line size.
  4. Select gasket material for the product, temperature and cleaning chemicals.
  5. Check that all three parts come from compatible standards.

Frequently Asked Questions

What is the difference between tri clover and tri clamp?

There is no difference. Tri clover, tri clamp, TC clamp and sanitary clamp all describe the same hygienic quick-release connection.

How do I measure a tri clover clamp size?

Measure the outside diameter of the ferrule flange, then match it to the size chart. For example, a 50.5 mm flange uses a 1″–1.5″ clamp.

Can a 1″ and 1.5″ tube use the same clamp?

Yes. Standard 1″ and 1.5″ ferrules share the same 50.5 mm flange OD, so they use the same clamp and gasket size.

Which gasket is best for tri clover clamps?

Silicone is the most common choice for food and dairy. EPDM suits steam and hot water, while PTFE suits aggressive chemicals.

Are tri clover clamps reusable?

Yes. Clamps and ferrules are reusable. Gaskets should be inspected regularly and replaced when worn or deformed.

Conclusion

The right tri clover clamp depends on ferrule flange size, ferrule standard, pressure and gasket material. Using the size chart above helps you match clamps, ferrules and gaskets correctly and avoid leaks in hygienic lines.

Related Products and Guides

Need TC clamps, ferrules or gaskets? Share your size, standard and quantity via the Cera Pure Steel contact page or call +91 87938 47434.